2711DUET Addi Chair
Assembly Instructions
2711DUET
— Page 3 — 08/18
Tools Required:
Phillips screwdriver, 1/2" open end or box end wrench
1.
Turn the Seat Assembly (A) upside-down on a clean, protected surface. Attach the Back
Assembly (B) to the Seat Assembly (A) with four 5/16" x 35mm Hex Bolts (D) and four 1" Flat
Washers (C). See Figure 1.
2. Turn the chair upright and place at its final destination. See Figure 2.
Fig. 1
A
D
C
C
D
x 4
x 4
B
Fig. 2
