Whittier Wood Furniture 1349FSTe Скачать руководство пользователя страница 2

Страница: 2 / 6

1346FSTe McKenzie Queen Bed

1349FSTe McKenzie King Bed

Parts List

1346FSTe_1349FSTe — Page 2 — 04/18

Please identify the parts and check that quantities received match those on this list.

If you need to replace a part, refer to the following letter and part name.

1347FSTe Queen Bed (Headboard/Footboard Kit)

1350FSTe King Bed (Headboard/Footboard Kit)

Part

Description

Quantity

Headboard

Footboard

Slat

#8 x 1-1/4" Black Screw

(16 inserted)

1/4" x1/2" Hex Bolt

Male Bracket (attached)

1/4" Lock Washer

T-Nut (inserted)

5mm Hex Wrench

Hanger Bolt (inserted)

Slat Support (attached)

Adjustable Glide with Hex Nut (installed)

Assembled Foot

5/16" x 3/4" Insert Nut (inserted)

#8 x 1-1/4" Pan Head Screw (inserted)

#10 x 2" Pan Head Screw (inserted)

1347 shown in illustrations.

Содержание 1349FSTe

Страница 3: ...ing Bed Parts List 1346FSTe_1349FSTe Page 3 04 18 1348FSTe Queen King Bed Rail Kit Part Description Quantity Ge Side Rail 2 K 8 x 1 Black Screw inserted 16 O Female Bracket attached 4 ZE 10 x 2 Pan Head Screw inserted 22 1348 shown in illustrations ...

Страница 4: ... Phillips Screwdriver 1 Remove the Slats Cb from the back of the Headboard A as seen in Figure 1 and place them off to the side 2 Using the Hex Wrench N provided attach the Side Rails Ge to the Headboard A with four 1 4 x1 2 Hex Bolts H and 1 4 Lock Washers J as shown in Figures 2 and 2a H Fig 2 A Ge J J H Fig 2a J H x 4 x 4 Fig 1 A Shipping Strap Cb ...

Страница 5: ...age 5 04 18 3 Using the Hex Wrench N provided attach the Footboard Be to the Side Rails with four 1 4 x1 2 Hex Bolts H and 1 4 Lock Washers J as shown in Figures 3 and 3a 4 Attach an Assembled Foot ZB to four of the five Slats Cb as shown in Figure 4 Cb Fig 4 X 4 ZB Fig 3 Be H J Fig 3a J H x 4 x 4 ...

Страница 6: ... on the bottom edges of the rails and place the slat without the Assembled Foot nearest to the Footboard Attach with 8 x 1 1 4 Black Screws E See Figure 6 7 Adjust the Adjustable Glides with Hex Nut ZA on the Assembled Feet ZB so the Glides just touch the floor making sure the Assembled Feet bear weight ZA Fig 7 ZB E x 10 Fig 6 E Cb Slat without an Assembled Foot Cb Cb ...