background image

ITEM NO.: TV-36 
REVISED JAN 10, 2015 

Printed in Vietnam

 

                    

- 2 - 

 

BEFORE ASSEMBLY

 

 

Thank you for purchasing this quality product. This product has been designed for easy assembly and 
constructed for durability.  All parts were checked prior to packaging to insure quality.  Prior to beginning 
assembly, however, make sure all parts and hardware are included and free of obvious defect.  If a part is 
missing or defective, please contact the store where purchased.  If hardware is missing, or you need help with 
assembly, please call toll free 888-944-8396. 
 

IMPORTANT NOTE:

   

-

 

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from 
being scratched. 

-

 

Remove all wrapping material, including staples & packing straps before you start to assemble.  

-

 

DO NOT tighten all screws and bolts until completely assembled.  

-

 

Keep all hardware parts out of reach of children. 
 

WARNING: 

Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your 
product. Protect the surface of the product with cloth if you are using any product with rubber feet or 
base. 

 
 
 
 
 

  

 
 
 
 
 
 

 

ASSEMBLY TOOLS REQUIRED 

 

NOT INCLUDED

Содержание TV-36











Отзывы: