background image

GM24k Controls 

10 Garrett Metal Detectors

Volume, 

Threshold 

Level  

Volume Adjust 

(tap) 

 

Threshold Adjust 

(hold)  

The VOLUME control on your 

GM24k

 only  

adjusts the sound level of target sounds and 

confirmation beeps. It is used in conjunc-

tion with the THRESHOLD to give you the 

most control over the dynamic range of your  

detector. This control is adjusted by tapping 

the SPEAKER icon and then using the UP and 

DOWN buttons to adjust it louder or quieter. 

Note that holding the SPEAKER button  adjusts 

the threshold, which will display the letters “th” 

on screen. Adjust the THRESHOLD so you can  

hear a faint hum. This allows for best perfor-

mance on small targets. 

For example, with a low THRESHOLD and a 

high VOLUME, there is a large range of sig-

nals you might hear. Some will be just above 

the  threshold; others will bang out loud and 

clear. You can adjust VOLUME and THRESH-

OLD to your preference, but in general the best 

range of  target sounds will be available with 

a high volume  and low threshold. At volume  

levels 9 and 10, you will see “b1” and “b2” on 

the display as these two levels enable consecu-

tive audio boosts for low signals.

External Speaker or Headphones?  

Volume/Threshold Adjustment  

There are advantages to running your 

GM24k

 with headphones. Battery life will be increased and it will  be 

much easier to hear the faintest signals. Wind especially can cause issues with using the external  speaker 

on a gold detector, as the buffeting in your ears can mask small target sounds. 

However, in snake country or in hot and humid conditions, headphones may not be an option. The 

GM24k  

has independent volume settings, meaning that you can adjust the volume for the external speaker as well  

as the headphones. These settings are saved when you power the machine down. The 

GM24k

 automatically 

senses when headphones are plugged in, and the machine will switch to the saved  headphone volume level. 

It then returns to the saved speaker volume level when the headphones are removed.  

Содержание 1142650



























Отзывы: