WHITEHALL MANUFACTURING
• P.O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
5
Instructions for Operation and Care of Little Therm Compact Thermalator
1 Little Therm Model LT-4
4 Thermal Packs (10" x 12")
1 Wire Rack - (stainless steel with vinyl coating)
1 Warranty Registration Card
1 Instructions for Operation and Care
If you are missing anything, please call the phone number listed on the back page.
Remove all the shipping material. Remove Thermal Packs and wire rack from inside the tank. Remove
all packaging from inside the tank, especially from under the heating element inside the tank. Clean the
unit thoroughly before using.
Place the Little Therm at a convenient level, such as on a table or a scratch resistant counter top. Before
moving the Little Therm, unplug and cool the unit. Only move the unit to empty or fill it. Always use the
handles. The unit may be hot to the touch.
Before the first use, you must condition each Thermal Pack. Soaking in water lets the pack swell to its full
size. This is necessary only BEFORE the first use. You can then reuse the pack after about 15 minutes of
reheating.
1- Take the Thermal Pack by the corner loops - one white and one blue - so the sections are horizontal.
2- Gently shake the pack back and forth to evenly distribute the filler material.
SETTING UP
1. Your new Little Therm includes the following:
2. Unpacking your Little Therm
3. Device Placement:
Shake to distribute
the dry material
4. Pre-Soaking Thermal Packs
3- Place the Thermal Packs in a large metal pan to pre soak (use stainless steel or enamel-ware, DO
NOT use aluminum) or plastic container. You may use the Little Therm for pre soaking.
Place the Thermal Pack in the unit with sections horizontal.
Change the water after soaking or water will become cloudy.
4- Fill the container with enough tap water to completely cover the Thermal Packs.
5- Soak the packs for 1 hour minimum, 2 hours or more is recommended.
6- Return the packs to upright position. The packs are now ready for heating.
•
•
Turn the packs
to upright
