WHITEHALL MANUFACTURING
• P.O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
4
POWER INLET
YEL
L
WHT
N
GND
GRN
GND
THERMOSTAT
RUNNING
CAPACITOR
COMPRESSOR
PTC THERMISTER
GRAY
TROUBLESHOOTING
What should I do if my GlacierFreeze is too warm?
Adjust Cold Control. See page 3.
Make sure door is closed properly.
Condenser coils on back may need cleaning. See
page x.
--------------------------------------
•
•
•
What should I do if moisture collects on the outside?
Frequent door openings in high humid conditions
will cause this. Reduce door openings and reduce
time door is open.
Make sure door seal is tight.
•
•
What should I do if my GlacierFreeze is too noisy?
Make sure cabinet is level, not touching a wall or
other surface, and rests squarely on the floor on all
four corners.
Make sure condenser coils are free of lint and dust.
Normal noises include refrigerant gurgling as it
passes through tubes and the compressor clinking
on and off.
--------------------------------------
•
•
•
What should I do if there is an odor coming from my
GlacierFreeze?
Clean interior. See page 3.
•
WIRING DIAGRAM
Instructions for Operation and Care of GlacierFreeze
