DEHUMIDIFIERS
※
※
Safety Notes
The WhiteWing Series Dehumidifier must always be connected using a grounded
electrical connection as required for all electrical appliances. The warranty is voided and all
responsibility for the operation transfers to the owner if non-grounded wiring is
utilized.
WhiteWing
Before moving the dehumidifier, turn off dehumidifier and allow pump to empty
reservoir. (Or if unit is already off, press“P”button to confirm drain reservoir is empty).
After the pump has finished operation, unplug the power cord and relocate unit to the
desired position.
If the inside of the unit has gotten wet for any reason, the unit should be opened
and allowed to dry thoroughly before reconnecting to electric and restarting.
For proper operation, neither the inlet nor discharge should be positioned against a
wall. A minimum of 12”clearance between unit and any obstruction is required.
Do not insert any objects or fingers into the inlet or discharge.
All work on unit should be done with the unit“off”and unplugged.
Do not use water to clean unit exterior. Only use a damp cloth to clean exterior and
always unplug the unit first.
Do not use unit as shelf or device to hang clothes. This could cause damage to unit.
Do not stand on machine.
WhiteWing Dehumidifiers must be maintained and serviced by qualified technicians.
Dehumidifiers are intended for use only when the unit is installed in a level
and upright position. Operating the unit in any other position could cause water to come
in contact with the electrical components.
