White-Westinghouse WM40T-1, Инструкция по эксплуатации

Страница: 23 / 28

FAILURE PROBABLE CAUSE
METHODS OF
ELIMINATION
Clothes exceeding the
maximum capacity
has been filled in your
machine. Put the clothes in your
machine in a manner
not to exceed its
maximum capacity.
Your water may be
hard.
Use the amount of
detergent according to
the declaration of the
detergent producer.
The washing result is
not good.
Distribution of the
clothes in your
machine is not well-
balanced. Spread the clothes
inside the machine in
an orderly and well-
balanced manner .
The water is drained
from the machine as
soon as it is filled.
The end of the water
drain hose is in a
position too low
according to the
machine.
Place the water drain
hose in an appropriate
height.(**)
No water is seen in the
drum during washing.
No failure. The water is
at the lower part of the
drum.
-
There are residues of
detergent on the
clothes.
The pieces of some
detergents which do
not dissolve in water
may stick to your
clothes as white stains.
By calibrating your
machine for “Rinsing”
program,make an
additional rinsing or
eliminate the stains
After drying with the
help of a brush.
There are gray stains
on the clothes.
These stains may be
caused by oil,cream or
ointment .
In the next washing
operation, use the
maximum detergent
amount declared by
the detergent producer.
(**) See the section concerning instalations your machine.
50