background image

7

Energy Saving Factory Pre-Program

The 1F80ST-0471 thermostats are programmed with the energy saving settings shown in the table below for all days of the 
week. If this program suits your needs, simply set the thermostat clock and press the 

Arrancar

 button.

The table below shows the factory set heating and cooling schedule for all days of the week.

Planning Your Program – Important

The Heating and Cooling Program schedules below allow you to pencil in your own program times and temperatures.

The 1F80ST-0471 comes confi gured for 5/2 day programming and can also be confi gured for 5+1+1 programming (see 
confi guration section).

Factory settings are listed on Monday through Friday, Saturday and Sunday. If you are re-programming a 5/2 day schedule, 
pencil in your own times and temperatures directly below the factory times and temperatures.

If you are re-programming a 5+1+1 fi ll in all lines with the times and temperatures you want.

Keep the following guidelines in mind when planning your program.

•  In Heating, lower temperatures will save energy.

•  In Cooling, higher temperatures will save energy.

  If you plan on using Auto Changeover, do not program the heating higher than the cooling.

PROGRAMMING (For Programmable Model Only) 

Wake Up

(Period 1)

Leave For Work

(Period 2)

Return Home

(Period 3)

Go To Bed

(Period 4)

Heating

Program

6:00 AM

70°F

8:00 AM

62°F

5:00 PM

70°F

10:00 PM

62°F

Cooling 

Program

6:00 AM

75°F

8:00 AM

83°F

5:00 PM

75°F

10:00 PM

78°F

Worksheet for Re-Programming 5/2 Day and 5+1+1 Day Program

Heating

Program

Wake Up

(Period 1)

Leave For Work

(Period 2)

Return Home

(Period 3)

Go To Bed

(Period 4)

Mo-Fr

6:00 AM

70°F

8:00 AM

62°F

5:00 PM

70°F

10:00 PM

62°F

Sat-Sun

or Sat

6:00 AM

70°F

8:00 AM

62°F

5:00 PM

70°F

10:00 PM

62°F

Sun

5+1+1 only

6:00 AM

70°F

8:00 AM

62°F

5:00 PM

70°F

10:00 PM

62°F

Cooling

Program

Wake Up

(Period 1)

Leave For Work

(Period 2)

Return Home

(Period 3)

Go To Bed

(Period 4)

Mo-Fr

6:00 AM

75°F

8:00 AM

83°F

5:00 PM

75°F

10:00 PM

78°F

Sat-Sun

or Sat

6:00 AM

75°F

8:00 AM

83°F

5:00 PM

75°F

10:00 PM

78°F

Sun

5+1+1 only

6:00 AM

75°F

8:00 AM

83°F

5:00 PM

75°F

10:00 PM

78°F

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Содержание 1F80ST-0471









Отзывы: