16
17
Options
Default Setting Additional Information
1. Do you want
ON
Select
default
ON
for now.
to be reminded
(13 weeks)
To modify a fi lter-change
when it is time to
reminder, see Additional
change the air fi lter?
Features section 4.5.
2. Do you have a
OFF
If you do not have a Heat
Heat Pump?
(no Heat Pump)
Pump, select
OFF
.
If you do have a Heat Pump,
use the buttons
to select (
On1
) for a 1-stage
or (
On2
) for a 2-stage
Heat Pump.
Press the
MENU
button and, using the buttons, scroll down until
MORE OPTIONS
is fl ashing. Press
OK
.
You will be prompted to answer 5 “Options” questions.
•
Use buttons to answer each question.
•
Use
buttons to advance to the next question.
3.3 Select options
When you have answered all 5 questions, press the DONE button.
Options
Default Setting Additional Information
3. Do you want the
FA
Select
SL
(slow) if you
Cycle Rate to be
(fast)
have Hydronic (water
Fast or Slow?
or steam) Heating.
Otherwise, use default
FA
.
4. Do you want
°F
temperature
(Fahrenheit)
displayed in °C
(Celsius) or °F
(Fahrenheit)?
5. How much
0
(no offset)
Select default
0
for now.
displayed
To adjust the displayed
temperature offset
temperature reading, see
do you want?
Additional Features
section 4.6
To determine if you have a Heat Pump and/or whether it is a
1-stage or 2-stage model, see the Appendix at the end of manual.
3.4 Turn on power to your heating and
cooling system.
Congratulations!
You have completed the basic setup of
your new thermostat. It’s ready to use.
To read about additional thermostat features, continue to section 4
.
Navigation Buttons