White Rodgers F145-1378, Руководство по установке

Страница: 4 / 6

4
CONFIGURATION CONFIGURATION
CONFIGURATION CONFIGURATION
CONFIGURATION
Comfort-Set II Comfort-Set II
Comfort-Set II Comfort-Set II
Comfort-Set II
Single Stage Models Single Stage Models Single Stage Models Single Stage Models Single Stage Models: Verify jumper wire W-22 W-22 W-22 W-22 W-22 on the back
of the thermostat (not the subbase) has been clipped.
Multi-stage and Heat Pump Models
Multi-stage and Heat Pump Models Multi-stage and Heat Pump Models Multi-stage and Heat Pump Models Multi-stage and Heat Pump Models: Verify jumper wire W- W- W- W- W-
18 18 18 18 18 on the back of the thermostat (not the subbase) has
been clipped.
Comfort-Set III/Comfort-Set 90/90 Series Comfort-Set III/Comfort-Set 90/90 Series
Comfort-Set III/Comfort-Set 90/90 Series Comfort-Set III/Comfort-Set 90/90 Series
Comfort-Set III/Comfort-Set 90/90 Series
Single Stage Models Single Stage Models Single Stage Models Single Stage Models Single Stage Models: Verify jumper wire W-922 W-922 W-922 W-922 W-922 on the
back of the thermostat (not the subbase) has been clipped.
You must also enable the remote sensor option in the
Installation Instructions, Configuration Menu.
Multi-stage and Heat Pump Models
Multi-stage and Heat Pump Models
Multi-stage and Heat Pump Models Multi-stage and Heat Pump Models
Multi-stage and Heat Pump Models: When installing a
remote sensor you must enable the remote sensor option in
the Installation Instructions, Installer Menu.
REMOTE SENSOR CALCULATED PRIORITY AVERAGE REMOTE SENSOR CALCULATED PRIORITY AVERAGE
REMOTE SENSOR CALCULATED PRIORITY AVERAGE REMOTE SENSOR CALCULATED PRIORITY AVERAGE
REMOTE SENSOR CALCULATED PRIORITY AVERAGE
1F93-380, 1F94-371, 1F95-371, 1F95-377, 1F95-391 1F93-380, 1F94-371, 1F95-371, 1F95-377, 1F95-391
1F93-380, 1F94-371, 1F95-371, 1F95-377, 1F95-391 1F93-380, 1F94-371, 1F95-371, 1F95-377, 1F95-391 1F93-380, 1F94-371, 1F95-371, 1F95-377, 1F95-391
Single stage thermostats accept only 1 remote sensor. 90 Series multi-stage and heat pump thermostats accept up to 3
indoor remote sensors and can be assigned sensor priorities.
Tables 1-3 show how priority (LO, AVG, HI) effects the room temperature calculation. The example below table three shows
the calculation of each remote sensor and how it uses them to arrive at room temperature average.
Table 1: Remote Sensor A configured as a LO priority sensor Table 1: Remote Sensor A configured as a LO priority sensor
Table 1: Remote Sensor A configured as a LO priority sensor Table 1: Remote Sensor A configured as a LO priority sensor Table 1: Remote Sensor A configured as a LO priority sensor
Remote Remote
Remote Remote
Remote Sensor Sensor
Sensor Sensor
Sensor Priority Priority
Priority Priority
Priority
Sensor Sensor Sensor Sensor Sensor Priority Priority Priority Priority Priority Multiplier Multiplier Multiplier Multiplier Multiplier Room Temperature Room Temperature Room Temperature Room Temperature Room Temperature Averaging Calculation Averaging Calculation Averaging Calculation Averaging Calculation Averaging Calculation
SA LO 1 70°F (Sensor Temp.) 1 x 70 = 70 (Priority Multiplier x Room Temp.)
Table 2: Remote Sensor B configured as a AVG priority sensor Table 2: Remote Sensor B configured as a AVG priority sensor Table 2: Remote Sensor B configured as a AVG priority sensor Table 2: Remote Sensor B configured as a AVG priority sensor Table 2: Remote Sensor B configured as a AVG priority sensor
Remote Remote Remote Remote Remote Sensor Sensor Sensor Sensor Sensor Priority Priority Priority Priority Priority
Sensor Sensor
Sensor Sensor
Sensor Priority Priority
Priority Priority
Priority Multiplier Multiplier
Multiplier Multiplier
Multiplier Room Temperature Room Temperature
Room Temperature Room Temperature
Room Temperature Averaging Calculation Averaging Calculation
Averaging Calculation Averaging Calculation
Averaging Calculation
SB AVERAGE 2 75°F (Sensor Temp.) 2 x 75 = 150 (Priority Multiplier x Room Temp.)
Table 3: Remote Sensor C configured as a HI priority sensor Table 3: Remote Sensor C configured as a HI priority sensor
Table 3: Remote Sensor C configured as a HI priority sensor Table 3: Remote Sensor C configured as a HI priority sensor
Table 3: Remote Sensor C configured as a HI priority sensor
Remote Remote
Remote Remote
Remote Sensor Sensor
Sensor Sensor
Sensor Priority Priority
Priority Priority
Priority
Sensor Sensor Sensor Sensor Sensor Priority Priority Priority Priority Priority Multiplier Multiplier Multiplier Multiplier Multiplier Room Temperature Room Temperature Room Temperature Room Temperature Room Temperature Averaging Calculation Averaging Calculation Averaging Calculation Averaging Calculation Averaging Calculation
SC HI 4 80°F (Sensor Temp.) 4 x 80 = 320 (Priority Multiplier x Room Temp.)
The example below lists three sensors each with a different priority and room temperature. All three sensors are combined in
the calculation to display the average temperature. The priority multiplier shown in the tables above causes a sensor with
low priority to carry less weight in the calculated average. A sensor with a HI priority setting contributes more to the calcu-
lated average. Assume that the building in which the thermostat is located has three indoor remote sensors (SA, SB, SC)
that have different room temperatures (70, 75, 80). The calculated average will be displayed as the room temperature
shown in the example below.
Example: Remote Sensors A, B, and C configured as a LO, AVG, and HI priority sensors Example: Remote Sensors A, B, and C configured as a LO, AVG, and HI priority sensors Example: Remote Sensors A, B, and C configured as a LO, AVG, and HI priority sensors Example: Remote Sensors A, B, and C configured as a LO, AVG, and HI priority sensors Example: Remote Sensors A, B, and C configured as a LO, AVG, and HI priority sensors
Remote Remote Remote Remote Remote Sensor Sensor Sensor Sensor Sensor Priority Priority Priority Priority Priority
Sensor Sensor
Sensor Sensor Sensor
Priority Priority
Priority Priority Priority
Multiplier Multiplier
Multiplier Multiplier Multiplier
Room Temperature Room Temperature
Room Temperature Room Temperature Room Temperature
Averaging Calculation Averaging Calculation
Averaging Calculation Averaging Calculation Averaging Calculation
SA LO 1 70°F (Sensor Temp.) 1 x 70 = 70 (Priority Multiplier x Room Temp.)
SB AVERAGE 2 75°F (Sensor Temp.) 2 x 75 = 150 (Priority Multiplier x Room Temp.)
SC HI 4 80°F (Sensor Temp.) 4 x 80 = 320 (Priority Multiplier x Room Temp.)
Avg. Calc. (540)/Sum Priority Mult. (7)
540/7 = 77°F (Calculated Displayed Temp.)