F145-1328/F145-1378
F145-1328/F145-1378
F145-1328/F145-1378
F145-1328/F145-1378
F145-1328/F145-1378
Indoor Remote Sensor/Outdoor Remote Sensor
PART NO. 37-6606A
PART NO. 37-6606A
PART NO. 37-6606A
PART NO. 37-6606A
PART NO. 37-6606A
0440
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Operator: Save these instructions for future use!
Operator: Save these instructions for future use!
Operator: Save these instructions for future use!
Operator: Save these instructions for future use!
Operator: Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE
INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL
INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL
INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL
INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL
INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL
INJURY AND/OR PROPERTY DAMAGE.
INJURY AND/OR PROPERTY DAMAGE.
INJURY AND/OR PROPERTY DAMAGE.
INJURY AND/OR PROPERTY DAMAGE.
INJURY AND/OR PROPERTY DAMAGE.
PRECAUTIONS
PRECAUTIONS
PRECAUTIONS
PRECAUTIONS
PRECAUTIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
White-Rodgers is a division
of Emerson Electric Co.
www.white-rodgers.com
If in doubt about whether your wiring is millivolt, line, or low
voltage, have it inspected by a qualified heating and air
conditioning contractor or electrician.
Do not exceed the specification ratings.
All wiring must conform to local and national electrical codes
and ordinances.
This control is a precision instrument, and should be handled
carefully. Rough handling or distorting components could cause
the control to malfunction.
The remote sensors cannot be used with systems where power
interruptions are part of normal system operation.
To prevent electrical shock and/or equipment dam-
To prevent electrical shock and/or equipment dam-
To prevent electrical shock and/or equipment dam-
To prevent electrical shock and/or equipment dam-
To prevent electrical shock and/or equipment dam-
age, disconnect electric power to system at main fuse
age, disconnect electric power to system at main fuse
age, disconnect electric power to system at main fuse
age, disconnect electric power to system at main fuse
age, disconnect electric power to system at main fuse
or circuit breaker box until installation is complete.
or circuit breaker box until installation is complete.
or circuit breaker box until installation is complete.
or circuit breaker box until installation is complete.
or circuit breaker box until installation is complete.
CAUTION
!
WARNING
!
Do not use on circuits exceeding specified voltage.
Do not use on circuits exceeding specified voltage.
Do not use on circuits exceeding specified voltage.
Do not use on circuits exceeding specified voltage.
Do not use on circuits exceeding specified voltage.
Higher voltage will damage control and could cause
Higher voltage will damage control and could cause
Higher voltage will damage control and could cause
Higher voltage will damage control and could cause
Higher voltage will damage control and could cause
shock or fire hazard.
shock or fire hazard.
shock or fire hazard.
shock or fire hazard.
shock or fire hazard.
Do not short out terminals on gas valve or primary
Do not short out terminals on gas valve or primary
Do not short out terminals on gas valve or primary
Do not short out terminals on gas valve or primary
Do not short out terminals on gas valve or primary
control to test. Short or incorrect wiring will damage
control to test. Short or incorrect wiring will damage
control to test. Short or incorrect wiring will damage
control to test. Short or incorrect wiring will damage
control to test. Short or incorrect wiring will damage
thermostat and could cause personal injury and/or
thermostat and could cause personal injury and/or
thermostat and could cause personal injury and/or
thermostat and could cause personal injury and/or
thermostat and could cause personal injury and/or
property damage.
property damage.
property damage.
property damage.
property damage.
NOTE
Operating humidity range:
Operating humidity range:
Operating humidity range:
Operating humidity range:
Operating humidity range: 0 to 90% RH (non-condensing).
20 gauge, three-conductor shielded cable must be used for all
remote sensor wiring.
The F145-1328 remote sensor is approved for indoor use
The F145-1328 remote sensor is approved for indoor use
The F145-1328 remote sensor is approved for indoor use
The F145-1328 remote sensor is approved for indoor use
The F145-1328 remote sensor is approved for indoor use
only.
only.
only.
only.
only.
Temperature range:
Temperature range:
Temperature range:
Temperature range:
Temperature range: 40° to 99°F
20 gauge, three-conductor shielded cable must be used for all
remote sensor wiring.
The F145-1378 remote sensor is approved for outdoor
The F145-1378 remote sensor is approved for outdoor
The F145-1378 remote sensor is approved for outdoor
The F145-1378 remote sensor is approved for outdoor
The F145-1378 remote sensor is approved for outdoor
use only.
use only.
use only.
use only.
use only.
Temperature range of outdoor probe:
Temperature range of outdoor probe:
Temperature range of outdoor probe:
Temperature range of outdoor probe:
Temperature range of outdoor probe: -40° to 140°F
INDOOR REMOTE SENSOR
INDOOR REMOTE SENSOR
INDOOR REMOTE SENSOR
INDOOR REMOTE SENSOR
INDOOR REMOTE SENSOR
OUTDOOR REMOTE SENSOR
OUTDOOR REMOTE SENSOR
OUTDOOR REMOTE SENSOR
OUTDOOR REMOTE SENSOR
OUTDOOR REMOTE SENSOR
Interior Mounting Base
Interior Mounting Base
Interior Mounting Base
Interior Mounting Base
Interior Mounting Base
Outdoor Probe
Outdoor Probe
Outdoor Probe
Outdoor Probe
Outdoor Probe
