background image

19

the thermostat in your home, answer ques-
tions 5 through 8. Keep in mind that you should
plan for both weekday and weekend programs.

FOR COMMERCIAL APPLICATIONS:

1a. What time does the first person arrive at

the building in the morning?

b. What temperature should the building be

at this time? (heating? cooling?) These
will be your MOR (morning) temperature
settings.

2a. What time do the building occupants reach

a maximum activity level (using lights,
equipment, meeting rooms, etc.)?

b. What temperature should the building be

at this time? These will be your DAY tem-
perature settings.

3a. What time do the building occupants reach

a minimum activity level (limited personnel
in building)? These will be your EVE
(evening) temperature settings.

b. What temperature should the building be

at this time?

4a. What time does the building become

vacant?

b. What temperature should the building be

at this time? These will be your NHT (night)
temperature settings.

IN YOUR HOME:

5a. What time does the first person get up in

the morning?

b. What temperature should the house be at

this time? These will be your MOR (morn-
ing) temperature settings.

Содержание 1F92W-71





































Отзывы: