White Outdoor ZT-1850, ZT-2150, ZT-2250 Скачать руководство пользователя страница 20

Страница: 20 / 56

Figure 25

Installing Mower Deck Belt

•

Remove the mower deck and the old mower deck
drive belt from the mower deck.

•

Install and route the new belt according to the
routing diagram. See Figure 26 or Figure 27.

•

Install the mower deck. Refer to Installing The
Mower Deck.

Figure 26

Figure 27

Installing The Mower Deck

•

Slide the mower deck under the Z-Series, making
sure belt covers are removed.

•

From the rear, reach under the muffler cover and
grasp the belt from the mower deck and bring it
between the hydraulic units.

•

Bring the belt between the pulley and the clutch. Do
not put the belt into the pulley grove yet.

•

From the front of the Z-Series, hold both front lift
rods up and slide the mower deck forward until the
lift rods go into the bracket.

•

Slide the mower deck backwards to insert the front
lift rods into the brackets. See Figure 25.

•

Align the mower deck so the lift link aligns with the
hanger bracket on the mower deck. See Figure 28.

Figure 28

•

Pull the support pin out and align with holes in
hanger bracket and lift link.

•

Release the support pin so that it goes through both
holes to secure deck. Repeat these steps for other
side of the deck.

•

From the rear, attach the belt around the clutch
pulley.

•

Engage tension bar by moving it into the bracket to
maintain belt tension and replace belt covers.

Retaining
Bracket and

44” Deck

Retaining
Bracket and

48” & 54” Deck

Front Lift Rod

44” Deck

To Clutch Pulley

Belt

To Clutch Pulley

48” & 54” Deck

Belt

Adjustable
Link

Lift Link

Shoulder
Screw

Support
Pin

Hanger
Bracket

Содержание ZT-1850, ZT-2150, ZT-2250

























































Результаты поиска

Содержание ZT-1850, ZT-2150, ZT-2250

Отзывы:

Похожие инструкции для ZT-1850, ZT-2150, ZT-2250

Бренды по названию

Популярные бренды

White Outdoor ZT-1850, ZT-2150, ZT-2250, Руководство оператора

Результаты поиска

Содержание ZT-1850, ZT-2150, ZT-2250

Отзывы:

Похожие инструкции для ZT-1850, ZT-2150, ZT-2250

Бренды по названию

Популярные бренды