background image

8

3

Setting Up 
Your Lawn 

Tractor

NOTE:  This Operators 
Manual covers a range 
of product specifications 
for various models. 
Characteristics and 
features discussed 
and/or illustrated in 
this manual 

may not

 be 

applicable to all models. 
MTD LLC reserves the 
right to change product 
specifications, designs 
and equipment without 
notice and without incur-
ring obligation.

WARNING

Use extreme care 
when handling 
gasoline. Gasoline is 
extremely flammable 
and the vapors are 
explosive. Never fuel 
machine indoors 
or while the engine 
is hot or running. 
Extinguish cigarettes, 
cigars, pipes, and 
other sources of 
ignition.

Attaching the Battery Cables

NOTE: The positive battery terminal is marked Pos. (+). 
The negative battery terminal is marked Neg. (–).

•  The positive cable (heavy red wire) is secured to the 

positive battery terminal (+) with a hex bolt and hex 
nut at the factory. Make certain that the rubber boot 
covers the terminal to help protect it from corrosion.

•  Remove the hex bolt and wing nut from the negative 

cable. 

•  Remove the black plastic cover, if present, from the 

negative battery terminal and attach the negative 
cable (heavy black wire) to the negative battery 
terminal (–) with the bolt and nut.

•  Make certain the retaining rod is in position over the 

battery, securing it in place. See Figure 3-1.

NOTE: If the battery is put into service after the date 
shown on the battery, charge the battery as instructed in 
the Maintaining Your Lawn Tractor section of this manual 
prior to operating the tractor.

Gas and Oil Fill-up

The gasoline tank is located under the hood and has a 
capacity of either two or three gallons. Do not overfill. 

WARNING: Use extreme care 
when handling gasoline. Gasoline 
is extremely flammable and the 
vapors are explosive. Never fuel 
machine indoors or while the 
engine is hot or running. Extin-
guish cigarettes, cigars, pipes, 
and other sources of ignition.

Service the engine with gasoline and oil as instructed in 
the separate Engine Operator/Owner Manual packed with 
your tractor. Read instructions carefully.

IMPORTANT: Your tractor is shipped with motor oil in the 
engine. However, you MUST check the oil level before 
operating. Be careful not to overfill.

Figure 3-1

Rubber Boot

Hex Bolt

Wing Nut

Retaining Rod

Содержание 616

































Отзывы: