White Outdoor 13A6606H790 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 56

background image

10

Systems Indicator Monitor / Hour Meter

Your tractor is equipped with four indicator lights and an hour meter as
shown in the figure here.

If the brake light or PTO light illuminates when attempting to start the unit,
proceed as follows:

It is normal for the oil light and the battery light to illuminate while the engine
is cranking, but if either illuminates while the engine is running, follow the
steps below as per indication:

Shift Lever

The shift lever has three positions: FORWARD (F), NEUTRAL (N) and
REVERSE (R).These control the direction of movement of the tractor.
Depress the brake pedal and let the tractor stop before moving the shift
lever to one of these three positions.

IMPORTANT:

Never force the shift lever. Doing so may result in serious

damage to the tractor’s transmission.

Cruise Control Button

NOTE: The cruise control feature should only be utilized while traveling in the forward direction.

•

To engage the cruise control, follow these steps:

1.

Place shift lever in FORWARD position, then slowly depress the drive pedal until desired speed is achieved.

2.

Lightly depress the cruise control button.

3.

While continuing to hold the cruise button in, lift your foot from the drive
pedal (you should feel the cruise latch engage).

4.

Once engaged, the cruise control button and the drive pedal will lock in
the “down” position, and the tractor will maintain the same forward
speed.

NOTE: Cruise control cannot be engaged at the tractor’s fastest ground
speed. If the operator should attempt to do so, the tractor will automatically
decelerate to the fastest optimal mowing ground speed.

•

To disengage the cruise control, lightly depress either the brake pedal or the drive pedal.

•

To change to the reverse direction when operating with cruise control, depress the brake pedal to disengage
the cruise control and bring the tractor to a complete stop. Then place the shift lever in the REVERSE position
and depress the drive pedal.

WARNING:

Never move the key into the Start position while the engine is running. Doing so may cause

damage to your engine’s starter.

Indication

Remedy

Brake light on

Engage the parking brake.

PTO light on

Move PTO knob to disengaged(OFF) position.

Indication

Remedy

Oil light on

Stop the tractor immediately and check thecrankcase oil level as instructed in the
engine manual. Add oil as required.

Battery light on

Indicates that the battery is in need of a charge or that the engine’s charging system is not
generating sufficient amperage. Refer to

Battery

on 17

of this manual for charging

procedure or have the engine’s charging system checked by anauthorized dealer.

1/10

P

+

Battery Light

PTO Light

Oil Light

Brake Light

Hour

Meter

N

F

R

Shift

Knob

«
...
8
9
10
11
12
...
»

Содержание 13A6606H790

























































Отзывы:

Нет отзывов

Похожие инструкции для 13A6606H790

Бренд: H&S Страницы: 32

Бренд: MacAllister Страницы: 18

Бренд: Gardena Страницы: 18

Бренд: Yard force Страницы: 11

Бренд: Snapper Страницы: 56

Бренд: Toro Страницы: 24

Бренд: Ariens Страницы: 6

Бренд: Bad Boy Страницы: 36

Бренд: LawnMaster Страницы: 38

Бренд: Yard-Man Страницы: 20

Бренд: Worx Страницы: 10

LANDROID WG757E

Бренд: Worx Страницы: 21

LANDROID L WG792E

Бренд: Worx Страницы: 20

Бренд: sunjoe Страницы: 16

Бренд: Ryobi Страницы: 13

Бренд: Ryobi Страницы: 48

Бренд: Ryobi Страницы: 24

Бренд: Ryobi Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды