White Mountain LS18SRAO-1, Инструкция по установке и эксплуатации

Страница: 6 / 24

30583-1-1013 Page 6
Before you begin: Do not, handle these logs with your bare hands! Always wear gloves to prevent skin irritation. After handling
logs, wash your hands gently with soap and water.
All Logs
The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and other problems may result if
the logs are not properly and firmly positioned in the appliance.
refer to figure 1 for the following warning.
warning: Failure to position the parts in accordance with this diagram or failure to use only parts specifically approved
with this appliance may result in property damage or personal injury.
Log Placement
LS(18, 24, 30)SrAO Logs
figure 1
The following WARNING applies when log set is installed
onto an unvented gas burner assembly.
wArNINg: This appliance is equipped for (natural or
propane) gas. field conversion is not permitted.
LOg PLAceMeNT
Attention: Refer to Page 22 Parts List and Parts View to order logs
for your appropriate model number.
Apply loose material (glowing embers) per appropriate Installation
Instructions and Owner's Manual. Replacement of loose material
(glowing embers) must be purchased from Empire Comfort Systems,
Inc. Application of excess loose material (glowing embers) may
adversely affect performance of the heater. WARNING: All previously
applied loose material must be removed prior to reapplication.
replacement Loose Material (glowing embers) Part Number
LS18SRAO 15999
LS24SRAO 15970
LS30SRAO 15970
Scan this code to see the log assembly video.