White Knight PSD04, Руководство пользователя

Страница: 19 / 28

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Copyright © 2022 White Knight Fluid Handling | A Graco company 9/14/2022 Version 1.1.4 Page | 15
187 E. 670 S., Kamas, UT 84036
435.783.6040 888.796.2476
4.4 Tools
Part Name Part Number QTY.
Sleeve Cap Wrench 12100-PV-0030 1
Muffler Cap Wrench 12100-PV-0043 1
4.5 Torque Instructions
Four pin wrench used to
remove/install the Sleeve
Cap(included with pump). Hex
is for use with a 19mm or ¾”
socket drive. (12100-PV-0042)
Manifold Tie Bolts
②
①
③
④
⑤
①
①
⑥
Tie bolts (purple) on both sides must be
torqued
before manifold bolts (blue) on
top and bottom.
Torquing of tie bolts should be done in a
crossing fashion such as: 1, 2, 3, 4, 5, 6.
There is no particular order for Torquing
manifold bolts other than they must be
done after head bolts.
Apply Loctite Antiseize Lubricant LB 8012
(or equivalent) to all bolts. This procedure
must be followed for assembly and also
re-torquing of bolts.
Four pin wrench used to
remove/install the muffler cap
(included with pump). Hex is for
use with a 19mm or ¾” socket
drive. (12100-PV-0043)