5
OFF
ON
A
C
Operating Instructions
20"
20"
B
50 cm
50 cm
Congratulations on your new purchase
We recommend that you read these instructions
carefully in order to quickly become familiar with
your new appliance.
A good appliance, which is used correctly, will
serve you for many years.
Unpacking the appliance
Dispose of packing materials in accordance with
regulations.
Check the spin dryer for any transport damage
which must be reported to your retailer within 24
hours.
Preparation for Use
1. Put the operating lever in the “OFF” position.
See diagram A.
2. Open the lid.
3. Remove the transport safeguard from inside the
spin drum.
4. We recommend that the spin drum be washed
out with a standard detergent before using for
the first time.
5. Place the spin dryer on a level floor at a distance
of about 50 cm away from the wall or other
objects. Never balance out irregularities in the
floor surface by laying wood, paper or similar
materials under the appliance.
See diagram B.
Loading the machine
1. Place each article of laundry
singly
in the
spin drum,
Distribute
the washing
evenly
in the drum and
press down firmly
, so as to
avoid leaving empty spaces (and thus avoiding
excessive vibration of the machine during
operation).
See diagram C.
2. Press the loaded washing down, so that there is
a gap of at least 3 cm between the washing and
the top edge of the drum, lastly, cover the washing
with a cloth, the ends of which should be tucked
well down inside the drum, so as to avoid items
of washing being catapulted out during operati-
on.
See diagram D.
3. Place a sufficiently large container for excess
water under the outlet spout.
See diagram E.
Do not tilt the dryer whilst in operation.
4. Do not place rolled up items of clothing (e.g.
jeans) in the spin dryer.
See diagram F.
