•
Tie the free end of the spinnaker halyard to the stainless bridle wire
•
With the other end of the halyard run it thought the cleat about 1m from the bottom of
the mast, then feed that though the eye in the front middle of the trampoline(1,2)
•
Pass it though the spinnaker shoot and tie it off at the mouth of the chute (3,4,5)
•
Take the tack line and pass it though the cleat on the starboard side of the mast on the
main beam, feed the other end through the eye on the pole mount and along the
spinnaker pole passing it up through the block on the end of the pole. Make sure its
above the whisker lines. (6,7,8)
•
Tie a bowline to the tack of the spinnaker with tack line
•
Tie a bowline on the head of the spinnaker with the free end of the spinnaker halyard
(the end tied to the striker)
•
With the other end of the spinnaker halyard you need to pass it though bottom rope
loop on the spinnaker then up to the top one and tie it off with a bowline, its best to
have these rope loops facing inwards as it easier to set up (starboard tack). If they are
facing outward you will need to take the halyard under the foot of the spinnaker and
then up through the rope loops.
Spinnaker Setup
15
8
7
6
5
4
3
2
1
