THE ULTRA
®
SERIES USER MANUAL
THE CONSORTIUM OF GLOBAL H20 MANUFACTURERS
9
water level reaches the preset condition. It will turn off automatically when water is
cool enough. During the cooling stage, press the COOL button to switch off the cooling
process.
5.
Press C/F button to switch the temperature display between Celsius and Fahrenheit.
6.
Generally, both heating and cooling can be turned on together. When the machine is
in heating and cooling process, the hot and cold water temperature will remain in the
preset range automatically. Keep pressing C/F button to have the Hot water
temperature display indicate the current setting. Then press the HOT or COOL button
to adjust the setting. Press HOT to raise the setting value; press COOL to lower the
value. Hot water adjustment range: 75
℃
~93
℃
. To adjust the cool water temperature
setting, press C/F again to have the Cool water temperature display indicate the
current setting. Then, press the HOT or COOL button to adjust the setting. Press HOT
to raise the setting value; press COOL to lower the value. Cool water adjustment range:
4
℃
~10
℃
.
7.
When the filtration system is ready for replacement, REPLACE on display will blink
to remind the user to clean or change filters (Please refer to Filter Replacement for
details). When cleaning or replacement is done, keep pressing RESET till REPLACE
indicator stops blinking. Press RESET again to turn off REPLACE indicator and to reset
the replacement warning time.
8.
The system will enter defrosting status and the DEFROST indicator on the screen
will blink when the environmental temperature is too low. If it is required to check the
current defrosting temperature, keep pressing COOL to show defrost temperature F##
at the position of humidity level on the screen.
9.
Press
button to dispense cool water. To dispense hot water, keep pressing
LOCK button till the HOT indicator blinks and makes a beeping sound; then press
button to get hot water.
10. not be alarmed when your machine turns off automatically. To conserve energy, your
machine has been fitted with an electronic sensor which automatically switches the
machine off when the storage tank is full. AND CAN NOW FILL AN EXTERNAL TANK full
11. When the air is dry, or during cold season, water generation will be slow. At this point,
external connection to city water will make the machine serve as a water purifier by
utilization of the filtration and sterilization system (Some parts are optional. Please contact
the local distributor for purchase). When switched on all is automatic