background image

WARRANTY CLAIMS

White Brothers forks are the highest quality and as such are warranted to be free from 
defects in materials and workmanship for a period of one year from the date of 
purchase for the original purchaser. On receipt of the fork, if it is found to be 
defective,  White Brothers will determine replacement or repair of the fork. This 
warranty is the sole and exclusive remedy.  White Brothers shall not be liable for any 
indirect, special or consequential damages. Warranty does not apply to any product 
that has been installed improperly or adjusted using methods not outlined in this 
manual. Warranty also does not cover forks that have been misused, or forks that 
have missing/altered serial numbers (located on the back of the right fork stanchion). 
The fork is not warrantied against damage in the appearance of the fork or for 
modifications not outlined in this manual. This warranty does not cover breakage, 
bending, or damage that may result from crashes, falls or abuse. Normal wear (i.e. 
seals, bushings, sliders finish, etc) and tear and damage caused by lack of proper 
maintenance is not included. 

*The warranty registration card must be filled out 

and returned within 30 days of purchase to activate and validate this warranty. 

A copy of the proof of purchase must be included with all warranties. Customers in 
the US please contact your White Brothers or your dealer for a Return Authorization 
Number (RA#) before returning the forks. All forks returned for inspection must be 
sent freight paid to:

White Brothers Cycling

580 N. Westgate Dr.

Grand Junction, CO 81505 

USA

MAINTENANCE LOG

Date  

Service Performed

   

                      

Page 14

Page 15

Содержание Groove 200

















Отзывы: