4 – Choice of accessories
- Universal brush is used for tiled floors and car-
pets as well as for rugs.
- Crevice nozzle is used for radiators, crevice, cor-
ners, baseboards and between cushions.
- Furniture nozzle is used for the furniture, blinds,
books and shelves.
I N S T R U C T I O N S F O R U S E
I N S T R U C T I O N S F O R U S E
Before using the appliance, pull out a sufficient length of cable and insert the plug into the power soc-
ket. A yellow mark on the power cable shows the ideal cable length. Do not expend the cable beyond
the red mark.
1. ON/OFF Switch (1)
Insert the power plug into the socket. Press the main ON/OFF Switch button on the vacuum body to
switch on the vacuum machine.
2. Power Control Button (6)
You can reduce or increase the suction power of the machine by turning the power control button (6).
3. Auto Cord Rewind Button (5)
To rewind the power cord, press the rewind button with hand and it is better to guide the cable with
the other hand to ensure that it does not whip causing damage.
M A I N T E N A N C E
M A I N T E N A N C E
1 - How to empty the dust cup
The dust cup has to be replaced as soon as it is empty or dirty. Always operate the cleaner with dust
cup properly installed.
- Unplug the vacuum cleaner.
- Remove the flexible hose.
- Open the lock block.
- Take off the dust cup.
- Hold it over a garbage can. Open the bottom of dust cup by pushing the black button. Empty the dust
cup. Shut off the bottom of dust cup. Replace the dust cup into the body of appliance.
- Close the lock block and remount the flexible hose.
2 – How to clean air-inlet filters
Filters have to be cleaned twice a year or when they become visible solid. Always operate the cleaner
with filters installed, otherwise, reduced suction or motor damage may result.
10
Notice_AT2120:Notice_kit viande 30/11/07 12:23 Page 10
