0908
5
1215 CC
1215 SC
1215 MS
Switch off the shredder and pull out the mains
plug. When cleaning only use a soft cloth and
a mild soap-water solution. However, no water
must enter the equipment.
Check that the door switch is working properly:
Warning!
If the following procedure cannot be
performed, switch off the document
shredder, disconnect the mains plug
and contact customer service.
• Insert the mains plug and switch on the
shredder.
• Feed in a sheet of paper and open the front
door while the paper is being drawn in.
The cutting unit must turn off immediately
and the “door open” indicator must light up.
• Close the door.
The cutting unit must not yet restart.
• Pull the paper out of the feed opening. The
light barrier must be clear.
• Switch off the machine and then switch back
on.
The cutting unit starts when paper is fed in.
Oil the cutting unit when
cutting performance de-
creases or the device be-
comes noisy, or every time
you empty the waste con-
tainer (Cross cut only):
• Spray special cutting apparatus oil through
the paper feed opening along the entire width
on to the cutting rollers.
• Run cutting system backwards (
) without
feeding paper.
Paper dust and particles are shaken off.
8 Cleaning and maintenance
Notice!
In the event that your document shred-
der does not start up or does not switch
off automatically after the last paper
infeed, paper dust may have collected
on the light barrier: Switch the machine
off and clean the light barrier in the
paper feed with a cloth.
Содержание 1215 CC
Страница 7: ...0908 7 1215 CC 1215 SC 1215 MS ...
