Whistler WHD-100, Руководство пользователя

Страница: 9 / 16

9
INSTALLATION
Placing HUD On Dash
1.
Once the HUD has been successfully paired with
vehicle, it needs to be properly placed on the
vehicle dash to provide easily viewed reflected
display and not to interfere with safe operation of
the vehicle.
2.
Locate the preferred placement on the vehicle dash
using Non-Slip Dash Pad included.
3.
Position the OBDII Connection Cable so as to not
interfere with safe operation of the vehicle.
4. Install the Reflective Film above the HUD to allow
the reflected information to be displayed and easily
seen by the vehicle driver.
5.
Once the film installation position is determined,
the film may be permanently installed to the vehicle
windshield.
NOTES:
1) Vehicles vary. Installation may require temporarily
holding the Reflective Film against the windshield and
repositioning the HUD to find the correct placement of
both the HUD and film that will provide the best viewing
angle.
2) Place the non-slip dash pad on your dashboard in the
desired location. If the dash pad becomes dull or no
longer grips, simply wipe the dash pad and dashboard area
clean with a damp cloth using nothing more than clean
water.