20
FREQUENTLY ASKED QUESTIONS
Q.
Why does the jump starter stop charging and begin
beeping?
A.
A problem was detected and has discontinued charging
as a safety precaution. Press and hold the power button
for 10-30 seconds to force the continuation of charging
and possibly correct the detected charging issue. After
pressing and holding the power button, disconnect
the charger from the wall and the jump starter to reset.
Reconnect charger to allow the unit to begin charging
normally –
HOWEVER
- if after this process the unit again
discontinues charging and begins to beep, IMMEDIATELY
DISCONNECT THIS JUMP STARTER FROM POWER SUPPLY
AND DISCONTINUE USE.
NOTE:
Pressing and holding the power button will
cause the flashlight to turn ON which is normal. After
disconnecting charger, the flashlight may be turned OFF
before reconnecting.
Q.
How do I dispose of this jump starter when it reaches
end of service life?
A.
This jump starter contains a rechargeable Lithium
Polymer (LiPo) battery pack. This battery pack is self-
contained and is not replaceable. Refer to the Battery
Precautions section of this user guide for battery disposal
information.
