To delete a message:
• Enter Custom mode and press Volume Up or
Volume Down button until selected band
appears on the display.
• Press the Quiet/Record button twice.
TIP:
To prevent the recording of the stop button
press (click), allow the recording process to continue
for 15sec and automatically time out.
External Audio Jack
The External Audio Jack can be used to connect an
external speaker or headphones in environments
with high ambient noise levels. The internal speaker
will be disconnected.
Power On and Self-Test
Each time your Whistler detector is turned on,
an automatic self-test sequence confirms that
the speaker and visual displays are functional.
• Press Power. Display shows in order:
1.
WHISTLER
2
. X-Band
3
. K-Band
4.
Ka-Band
5.
Ku-Band 6
6.LASER
7
. POP ON
8.
VG2 OFF
9.
SR OFF
10.
COMBO
Setting Saver
Setting Saver saves your personalized settings
so that when the detector is turned off and then
on again, you do not have to re-enter them.
Feature Engaged Confirmation
Each time a button is pressed, one beep confirms
feature “on”, two beeps confirm feature “off”.
Audio Level Adjustment
The audio levels can be adjusted high to low or
low to high.
• Press Volume up to increase audio level.
• Press Volume down to decrease audio level.
As audio level is adjusted, beeps are provided
and the display indicates volume level.
OPERATION
Auto Quiet Mode
Auto Quiet reduces the selected audio level to level
(1) approximately 5 seconds after a radar or safety
radar signal is detected. The alert for any new signal
within 20 seconds will resume at level (1). Auto Quiet
does not affect VG-2 or laser alerts.
• Press Quiet/Menu (before a signal is detected)
to engage Auto Quiet.
• Once the Auto Quiet mode is engaged, you
may cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to
cancel Auto Quiet mode.
Quiet Mode
Quiet cancels audio during an alert and any new
alert within 20 seconds. After 20 seconds, approxi-
mately 2 beeps are provided on any new alert and
unit then remains quiet.
• Press Quiet to cancel the audio.
• Press Quiet a second time during an alert to
restore the standard audio alert pattern; or turn the
unit off, then on.
Intellicord
®
Using Whistler’s included Intellicord
®
Power Cable
allows control of the detector’s features such as
Power On/Off, City Modes, Dim/Dark, and
Quiet/Auto Quiet with a simple press of the but-
ton on the Power Cable. Two features can be con-
trolled: one by a short press of the button (S1), and
the second by a long press of the button (S2).
Option Mode allows the user to program the fea-
ture assignments.
Highway Mode
Highway mode provides full audio warnings any time
radar (X, K, Ka, Ku, Safety Radar) or laser signals
are detected, and is recommended for open road
driving.( Highway mode lets every signal in)
Note:
In Combo Mode an “H
H” or “C
C” will be shown
to indicate mode of operation.
For more information on City and Highway mode, please visit
our FAQ page on our website: www
.whistlergroup.
com
OPERATION
City/City 1/City 2 Mode
Whistler’s Three Stage City Mode is designed to
reduce the annoyance of automatic door openers,
intrusion alarms and other devices which share frequencies
with police radar. Generally, X band is used for these
devices.
• Press City to cancel Highway mode and engage City.
• Press City again to enter City 1 Mode - display shows ‘C1
Lo X’.
• Press City again to enter City 2 Mode - display shows ‘C2
No X’
• Pressing City a fourth time cancels City 2 Mode and
returns the unit to Highway Mode.
In City Mode, weak speed/safety radar signal give
an initial alarm of two beeps, and then remains
quiet unless the signal becomes very strong. When
the signal strength increases, two additional beeps
are provided. City 1 and City 2 Modes operate the
same as Highway Mode, but in City 1 Mode, only the
X band sensitivity is lowered. In City 2 Mode, X-band
is not detected.
Caution:
Some towns/small cities may still be using
X band radar. City Modes do not change the audio
alert for laser or VG-2.
Engaging/Disengaging VG-2
See Option Select Mode to turn this feature on/off.
When a VG-2 signal is detected, the VG-2 alert is
sounded and the display flashes “VG-2”. After 3 sec-
onds the audio is canceled and the display no
longer flashes. This cycle is repeated if the VG-2 sig-
nal is again detected. During the period a VG-2 sig-
nal is detected, a radar signal cannot be detected.
However, because the VG-2 alert has confirmed that
a patrol car is nearby, you are already aware of the
potential for speed monitoring and can adjust your
speed accordingly. Laser detection is not affected
while a VG-2 signal is detected.
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and Quiet simultaneously and release.
• Display Shows:
• Press Power to exit.
OPERATION
8
9
10
