INSTALLATION
6
Important:
Some newer cars have a plastic safety
coating on the inside of the windshield. The windshield
bracket may leave permanent marks on this type of surface.
To find out if your vehicle has this type of windshield,
check the vehicle’s owner’s manual or ask your dealer. We
recommend that you do not leave the suction cup bracket on
the window in direct sunlight. If the detector is removed, this
may cause blistering of the dash in some vehicles.
• Slide the detector onto the bracket until it locks into place.
• If necessary, the unit may be leveled by bending the
windshield bracket. Press the bracket release button and
remove the detector before bending.
Power Cord Connection
• Plug the small end of the power cord into the unit’s power
jack.
• Plug the large end into the vehicle’s cigarette lighter
socket.
NOTE:
Cord fits tightly into detector. When installing the
cord, expect some resistance.
The USB can charge an ipad, iphone, smartphone, MP3 or
tablet. The output for the USB port is 1A.
Fuse Replacement
The lighter socket plug is equipped with a replaceable 3 amp,
3AG fuse located behind the silver tip. To replace the fuse,
carefully unscrew the tip of the plug.
