OPERATION
7
OPERATION
Memory/Beep Confirmation
All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button is pressed one
beep confirms feature
“on”
, two beeps confirm feature
“off”
.
Audio Level Adjustment
The audio levels can be adjusted high to low, or low to
high, in four steps: (1) is no audio level, (4) the highest.
• Press and hold
P/V
to increase audio level.
• Press and hold
P/V
to decrease audio level.
As audio level is adjusted, beeps are provided and the dis-
play indicates volume level. Example:
6
Auto Quiet Mode
Auto Quiet reduces the selected audio level to level (1)
approximately 5 seconds after a radar or safety radar sig-
nal is detected. The alert for any new signal within 20 sec-
onds will resume at level (1). Auto Quiet does not affect
VG-2 or laser alerts.
• Press Quiet (before a signal is detected) to engage Auto
Quiet. Display reads:
• Once the Auto Quiet mode is engaged, you may cancel
the audio alarm by pressing
Quiet
.
• Press
Quiet
(when the unit is not alarming) to cancel
Auto Quiet mode.
Note:
When Auto Quiet engages, it cancels the audio to
the optional Voice Module.
Quiet Mode
Quiet cancels audio during an alert and any new alert with-
in 20 seconds. After 20 seconds, approximately 2 beeps
are provided on any new alert and unit then remains quiet.
• Press
Quiet
to cancel the audio.
• Press
Quiet
a second time during an alert to restore the
standard audio alert pattern; or turn the unit off, then on.
AUTO
QUIET
VOL 1
VOL
Lowest Level 1
Highest Level 4
4
3300 10/4/00 9:43 AM Page 9
