OPERATION
11
OPERATION
10
Power On and Self-Test
Each time your Whistler detector is turned on, an automatic
self-test sequence confirms that the speaker, visual displays
are functional along with many of the saved settings. To
increase the volume, continue turning the volume knob.
Memory/Beep Confirmation
All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button is pressed one beep
confirms feature “on”, two beeps confirm feature “off”.
Audio Level Adjustment
To change the audio level:
•
Move Power/Volume button back to increase audio
level.
•
Move Power/Volume button forward to decrease
audio level.
Self-Test Quiet
Simply press the Quiet button during the self-test
sequence to cancel the self-test audio. This will not affect
radar/laser alerts. To restore the self-test audio, simply
press the Quiet button during the next self-test.
Auto Quiet Mode
Auto Quiet mode provides an alternate alert pattern
approximately 5 seconds after a radar signal is detected
followed by clicking. The clicking will continue for as long
as the detected signal is present and for any new signal
within 20 seconds. Auto Quiet mode does not affect laser
alerts.
• Press Quiet (before a signal is detected) to engage
Auto Quiet mode.
• Once the Auto Quiet mode is engaged, you may
cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to cancel
Auto Quiet mode.
Quiet Mode
Quiet mode cancels audio during an alert and any new alert
within 20 seconds. After 20 seconds of no radar signal
detected, the audio alerts are restored.
•
Press Quiet to cancel the audio.
•
Press Quiet a second time during an alert to restore
the standard audio alert pattern.
268ruman.qxp 1/17/2012 10:12 AM Page 13
