Page 12 | 1-800-343-9463
MCM
062519
Minimum Tools Needed:
Fully exposed mounting option
Flush mount option
Choose a mounting
option suitable
for the installation
location.
Partially recessed mounting option
Hammer
Saw
#2 Phillips-head
screwdriver
SELECTING MOUNTING OPTION
T-square
1
2
3
4
11.08”
11.08”
4.3”
4.3”
6.78”
6.78”
1.
Locate the desired installation location. Using a stud finder, locate the ceiling joists on either
side of the center point. Cut and frame an opening in the ceiling measuring 12” x 22.75”.
Make sure the framing is sufficient to support the weight of the cooling unit. Use only the
mounting locations provided. These locations ensure that the installer will not drill into any
vital components within the system.
2.
Determine which orientation the evaporator unit will be installed in (inside the cellar or with
attic access). Mounting options are listed below:
