WhisperKool Extreme 3500tiR Скачать руководство пользователя страница 44

Страница: 44 / 50

Page 42

EXti

110111

TECHNICAL ASSISTANCE

WhisperKOOL Customer Service is available Monday through Friday from 8:00 a.m. to 4:00 p.m. Pacific Time.

The customer service representative will be able to assist you with your questions and warranty information more

effectively if you provide them with the following:

•

The model and serial number of your WhisperKOOL Series Unit.

•

Location of unit and installation details, such as ventilation, ducting, construction of your wine cellar, and

room size.

Contact WhisperKOOL Customer Service

1738 E. Alpine Avenue
Stockton, CA 95205

www.whisperkool.com

Email: [email protected]

Phone: (209) 466-9463

US Toll Free (800) 343-9463

Fax (209) 466-4606

WhisperKOOL offers accessories to enhance and customize your Extreme wine cooling unit.

Exterior Grille

Protects the systems from the weather elements when placed on the exhaust side.

• Small Exterior Grille (used for Extreme 5000ti & 5000tiR)

• Large Exterior Grille (used for Extreme 8000ti & 8000tiR)

Condensate Pump Kit

The condensate pump kit is designed as an automatic condensate removal pump for water dripping out of our cooling

units’ drain line. The pump is controlled by a float/switch mechanism that turns the pump on when approximately

2-1/4” of water collects in the tank, and automatically switches off when the tank drains to approximately 1-1/4”. The

condensate pump kit allows the excess condensate to be pumped up to 20ft away from the unit.

Extreme Ducting Plenum

This plenum allows either side of the unit to be ducted. Duct the cold air through a vent into the cellar, duct the hot

exhaust air out of the home. This plenum allows for total installation flexibility.

Accessories can be purchased at www.whisperkool.com

ACCESSORIES FOR COOLING UNITS

Содержание Extreme 3500tiR



















































Результаты поиска

Содержание Extreme 3500tiR

Отзывы:

Бренды по названию

Популярные бренды

WhisperKool Extreme 3500tiR, Руководство пользователя

Результаты поиска

Содержание Extreme 3500tiR

Отзывы:

Бренды по названию

Популярные бренды