Fitting Kit
EN
K918W
●
Make sure the pad fits into the holes
underneath the foot.
Fitment
●
Clamps directly to edge of roof under the
doors
●
Please check the front of this manual for
information relating specifically to your
vehicle.
●
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●
It is important to put the clamps in the
correct position on the vehicle.
●
Letters refer to the part numbers stamped
on clamps.
●
Clamp Part Number:
A = A793
B = C646
7
