Fitting Kit
EN
K1005W
Fitment
●
Clamps directly to edge of roof under the
doors, pin located in hole on vehicle.
●
Please check the front of this manual for
information relating specifically to your
vehicle.
●
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●
Locate vehicle's fixed points.
●
Ensure the clamp pin is inserted into the
fixed point and the clamp sits flat to the
body side.
●
Tighten adjusting screw to 2 Nm (1.5 ft lb)
hand tight.
9
