LINE INPUT
(RCA jacks and 3.5mm stereo jack)
Use to connect the audio outputs
from computer sound cards, CD
players, MP3 players, etc. The
3.5mm (1/8”) jack is a tip / ring /
sleeve type. The tip is connected to
the + side of the white RCA jack, the
ring is connected to the + side of the
red RCA and the sleeve is common
ground to both.
LOOP THROUGH
“Y” connection of the input signal
can be achieved by connecting the
appropriate cable to the unused
input jacks as both types are
connected in parallel.
LOW-Z BALANCED OUTPUT
Male XLR provides balanced low
impedance, mic level signals suitable
for connection to balanced, mic level
inputs (mixing console, sound system
input, etc.) Phantom power passes
through from this output to the mic
input XLR.
Whirlwind will, at its
option, repair or replace
the unit. This warranty does
not cover damage resulting
from abuse, unauthorized
modifications or use of the
product in unintended
applications.
BALANCED MIC INPUT
Female XLR for connecting either
dynamic or condenser microphones to
the podMIX. The mic signal passes
through an isolation transformer for
increased noise and hum rejection.
Phantom power is directly coupled from
the output to the mic input so that the
sound system can power the mic in the
same way it would if the podMIX was not
in use.
MUTE SWITCHES
Individual mute switches allow
separate on/off control of the mic and
line inputs.
LINE INPUT LEVEL CONTROL
Adjusts the level of the line inputs after
they are summed together. This is
convenient for balancing the line input
to the microphone level going into the
sound system.
GND/LIFT (Switch)
This switch is usually left in the “GND”
position (grounds are connected from
inputs to output). If hum occurs when
using the podMIX, setting the switch to
the “LIFT” position may help to reduce
or eliminate it. (This disconnects the
ground between the line inputs and the
XLR output.)
www.whirlwindusa.com
®
Whirlwind Music Dist., Inc.
99 Ling Road
Rochester NY 14612
This product is warranted to
be free of defects in
materials or workmanship
to the original purchaser for
a period of 3 years from the
date of purchase. Should
w a r r a n t y s e r v i c e b e
required, return the unit
postage paid along with the
original sales receipt to:
