15
3
2
9
6
5
8
4
7
18 VDC
60 mA
1
1: INPUT (JACK) -
Connect your bass here.
2: OUTPUT (JACK) -
Connect a cord out to your amplifier here.
3: 18 VDC 60 mA (JACK) -
2.1mm barrel jack, with the center negative for connecting an 18 Volt DC
regulated supply, 60 mA capacity or greater with a center negative plug. The Whirlwind PS18EFX
(included) is recommended for proper operation.
4: ATTACK (SWITCH) -
Switches between three pre-defined attack rates. FAST causes the effect to kick in almost
instantaneously, MED allows some of the note’s initial attack to come through before the effect kicks in and SLOW
allows even more of the initial attack to come through.
5: OUTPUT LEVEL (KNOB) -
Controls the over all volume of the pedal.
6: LIMIT/COMPRESS (SWITCH) -
Switches between Compression and Limit mode. Compression gently evens out the
louder and softer levels in the signal and helps the bass “sit in the mix”. Think of limiting as a more aggressive form
of compression with a flavor all its own. Experiment!
7: INPUT GAIN (KNOB) -
Controls how much compression / limiting is applied to the signal. Adjusting this control
changes the overall volume of the effect. Use the OUTPUT LEVEL knob to match or even increase the overall volume
feeding your amp.
8: GAIN REDUCTION (LEDs) -
Displays the amount of limiting/compression in dBs.
9: ON/OFF (FOOTSWITCH) -
Engages and disengages the effect. When engaged, the LED above the
footswitch will illuminate.
+
-
Содержание oc-bass
Страница 1: ......
