whirlwind
™
99 Ling Road
•
Rochester NY 14612
(585) 663-8820
Fax: (585) 865-8930
MULTI DIRECTOR
®
OWNERS MANUAL
The Whirlwind
MULTI DIRECTOR
®
is a four channel rack mount version of the popular
DIRECTOR
®
direct box. It uses the same high quality components to faithfully reproduce the
sound of any instrument with the utmost in sonic clarity. The unit is a passive transformer
isolated DI that needs no batteries and will provide years of dependable service.
FEATURES and FUNCTIONS
INPUT
: Each of the four individual channels has three standard ¼
”
unbalanced, high
impedance bridging jacks for connection to instruments and amplifiers. All are wired in parallel
and can be used in any combination for input and through connections. Two are located on the
rear panel with the third on the front.
OUTPUT
: A three pin male XLR low impedance output is provided for each channel to connect
the DI to the sound board microphone input. Pin 2 is wired in phase with the tip of the ¼
”
input.
GROUND LIFT SWITCH
: In the lift position, the input ground is disconnected from pin 1 of
the output XLR. This can be very useful for eliminating buzz and hum between onstage
equipment and the PA system.
PAD SWITCH
: When switched to the in position, a 20dB pad is inserted across the input. This
attenuates very hot input signals such as amplifier speaker outputs or some keyboards. The pad
only affects the balanced XLR output.
