CARE AFTER USE
1.Ensure that the power is switched OFF and the
Plug is pulled out from the wall outlet.
2.Clean the machine with soft cloth.
3.Close the Wash Tub cover.
4.Hang up the Drain Hose well .
5.Take off the linlet Hose.
PRECAUTIONS
1.Do not touch Spin Tub while it is still rotating.
2.Do not use water hotter than 50
. Very hot
water may deform plastic parts of the machine
causing them to malfunction.
3.Always use the safety Cover duing spinning as
this prevents clothes from rising out of the Spin
Tub.
4.Do not wash the clothes with petroleum gas,
thinner or other inflammable liquids.
5.Check all clothes for loose buttons ,coins, pins,
etc.
6.Separate the clothes to be washed by color,
fabric and degree of dirt.
7.Use the detergent specifically produced for
Washing Machine.
NOTE: Do not spray water on the Control Panel.
MAINTENANCE
1. Clean
Wipe the machine with a clean dry or slightly
wet cloth. Do not use Household cleansers, or
volatile liquid cleaners.
2. Dismantle the Pulsator
If there is something under the Pulsator, it can
be taken out by dismantling the Pulsator.
Simply loose the Center Screw and use both
hands to lift evenly the Pulsator off its Shaft.
To refit, simply push it back and tighten the
screw.
4
3. Clean the Lint Filter
Grasp the frame of the Lint Filter, press down and
pull outwards.
Clean the lint in the Lint Filter.
