Whirlpool WWA-680, Руководство по обслуживанию

Страница: 2 / 13

2
ABNORMAL CONDITION
When the washer is abnormal, the washer stops as the every
actions turns off, beep tone sounds ON-0.1 second
and OFF-0.1 second for 6 seconds and number window LED display abnormal code and blink on and off. The
washer judges the following four conditions as abnormal condition.
1)
Abnormal condition of water supply
In supplying with water, the water level does not reach 1 level within 15 minutes or does not reach your
chosen water level within 30 minutes.
The number window LED display abnormal code: a and begin blinking on and off at the same time and
the electric buzzer sounds to indicate a problem.
2) Abnormal condition of drain
In draining, the water level does not go down below the reset level of the water level sensor within 8
minutes.
The number window LED display abnormal code: and begin blinking on and off at the same time
and the electric buzzer sounds to indicate a problem.
3) Abnormal condition of spin-dry
• The safety switch works 3 times continuously.
The number window LED display abnormal code: and begin blinking on and off at the same time
and the electric buzzer sounds to indicate a problem.
• The washer lid is opened.
The number window LED display abnormal code: and begin blinking on and off at the same time
and the electric buzzer sounds to indicate a problem.
4) Abnormal condition of water level sensor.
The water level sensor malfunctions.
The number window LED display abnormal code: and begin blinking on and off at the same time
and the electric buzzer sounds to indicate a problem.
WWA-680