Whirlpool WTW4616F, Инструкция по использованию и уходу

Страница: 15 / 36

15
Troubleshooting
If you experience Possible Causes Solution
Washer not performing as expected (cont.)
Fabric damage Sharp items were in pockets during
wash cycle.
Empty pockets, zip zippers, and snap or hook fasteners before
washing to avoid snags and tears.
Strings and straps could have tangled. Tie all strings and straps before starting wash load.
Items may have been damaged
before washing.
Mend rips and broken threads in seams before washing.
Fabric damage can occur if load is
tightly packed.
Load garments in loose heaps evenly around the basket wall.
Load with dry items only.
Use cycle designed for the fabrics being washed.
Use Deep Water Wash option for higher water fill. See “What’s
New under the Lid” and “Cycle Guide” to match your load with
the best cycle.
Add only 1 or 2 additional garments after washer has started.
Liquid chlorine bleach may have
been added incorrectly.
Do not pour liquid chlorine bleach directly onto load. Wipe up
bleach spills.
Undiluted bleach will damage fabrics. Do not use more than
recommended by manufacturer.
Do not place load items on top of bleach dispenser when
loading and unloading washer.
Garment-care instructions may not
have been followed.
Always read and follow garment manufacturer’s care label
instructions. See the “Cycle Guide” to match your load with
the best cycle.
Odors Monthly maintenance not done as
recommended.
See “Washer Care” in "Washer Maintenance."
Unload washer as soon as cycle is complete.
Using too much detergent. Be sure to measure correctly. Always follow the manufacturer’s
directions.
See “Washer Care” section.
Locked light is
flashing
The lid is not closed. Close the lid. The washer will not start with the lid open.
A cycle was stopped or paused
using the START/Stop button.
The washer may still be spinning. The lid will not unlock until the
basket has stopped spinning. This may take several minutes if
washing large loads or heavy fabrics.
Single-dose laundry
packet not dissolving
Adding laundry packet incorrectly. Be sure laundry packet is added to washer basket before
adding clothes. Do not add packet to dispenser. Follow the
manufacturer’s instructions to avoid damage to your garments.
Washer pumps out water
before finishing cycle
Lid is left open for more than
10 minutes.
Make sure lid is closed before starting a cycle and/or during
prewash (soak).
First try the solutions suggested here or visit our website at www.whirlpool.com/product_help
in Canada www.whirlpool.ca for assistance and to possibly avoid a service call.