background image

9

TROUBLESHOOTING

If you experience

Recommended Solutions

Microwave oven will 

not operate

Check the following:

 

Household fuse or circuit breaker -

 If a household fuse has blown or a circuit breaker has tripped, 

replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

 

Magnetron - 

Try to heat 1 cup (250 mL) of cold water for 2 minutes at 100% cooking power. If water does 

not heat, try the steps in the bullets below. If microwave oven still does not operate, call for service.

 

Door - 

Firmly close door. On some models, if a packaging spacer is attached to inside of the door, remove 

it, then firmly close door.
If a message about the door appears in the display, the door has been closed for 5 minutes or more 

without the microwave oven being started. This occurs to avoid unintended starting of the microwave 

oven. Open and close the door, then start the cycle.

 

Control - 

Make sure control is set properly. Make sure Control Lock is OFF. Make sure Demo mode (on 

some models) is OFF.

Arcing in the  
microwave oven

Check the following:

 

Soil buildup -

 Soil buildup on cavity walls, microwave inlet cover, cooking rack supports, and area where 

the door touches the frame can cause arcing. See “General Cleaning” in the “Microwave Oven Care” 

section.

Turntable alternates 
rotation directions

 

This is normal and depends on motor rotation at the beginning of the cycle.

Display shows  
messages

 

“Enter clock” with flashing digits means there has been a power failure. Reset the clock.

 

A letter followed by a number is an error indicator. Call for assistance.

Fan running during 
cooktop usage

 

This is normal. The microwave oven’s cooling fan, which is separate from the vent fan, automatically 

comes on during microwave oven operation to cool the microwave oven. It may also automatically come 

on and cycle on and off to cool the microwave oven’s controls while the cooktop below is being used.

Radio, TV, or cordless
phone interference

Check the following:

 

Proximity -

 Move the receiver away from the microwave oven, or adjust the radio or TV antenna.

 

Soil -

 Make sure the microwave oven door and sealing surfaces are clean.

 

Frequency -

 Some 2.4 GHz-based cordless phones and home wireless networks may experience static 

or noise while microwave oven is ON. Use a corded phone, a different frequency cordless phone, or avoid 

using these items during microwave oven operation.

Содержание WML75011HB













Отзывы: