17
Set Water Hardness Number
1. Press the
PROGRAM button once again to display a flashing 25 and the word
“HARDNESS”.
HARDNESS
2. Press the
Up or
Down buttons to set your water hardness number.
NOTE:
If your water supply contains iron, compensate for it by adding to the water hardness
number. For example, assume your water is 20 gpg hard and contains 2 ppm iron. Add
5 to the hardness number for each 1 ppm of iron. In this example, you would use 30
for your hardness number.
20 gpg hardness
2 ppm iron x 5 = 10
+10
(times)
30 HARDNESS NUMBER
Start a Recharge
Press the
RECHARGE button and hold for three seconds until Recharge begins to flash in the
timer display, starting a recharge. This recharge draws the sanitizing bleach into and through the water
softener. Any air remaining in the water softener is purged to the drain.
If you have questions about installation, programming, operating and routine maintenance...
call 1--866--986--3223, Monday -- Friday, 8 am to 9 pm, EST.
