Whirlpool WHD5090GW Скачать руководство пользователя страница 35

35

WHIRLPOOL

®

 LAUNDRY  

LIMITED WARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS 

REQUIRED TO OBTAIN WARRANTY SERVICE.

Please have the following information available when you call the 
Customer eXperience Center:

 

Name, address, and telephone number

 Model number and serial number

 A clear, detailed description of the problem

 

Proof of purchase including dealer or retailer name and address

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR 
A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces 

EPOPUBMMPXMJNJUBUJPOTPOUIFEVSBUJPOPGJNQMJFEXBSSBOUJFTPGNFSDIBOUBCJMJUZPSmUOFTTTPUIJTMJNJUBUJPONBZOPUBQQMZUPZPV5IJT

XBSSBOUZHJWFTZPVTQFDJmDMFHBMSJHIUTBOEZPVBMTPNBZIBWFPUIFSSJHIUTUIBUWBSZGSPNTUBUFUPTUBUFPSQSPWJODFUPQSPWJODF

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. 
WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow 
the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This 

XBSSBOUZHJWFTZPVTQFDJmDMFHBMSJHIUTBOEZPVBMTPNBZIBWFPUIFSSJHIUTUIBUWBSZGSPNTUBUFUPTUBUFPSQSPWJODFUPQSPWJODF

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Whirlpool makes no representations about the quality, durability, or need for service or repair of this major appliance other than the 
representations contained in this Warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes  
with this major appliance, you should ask Whirlpool or your retailer about buying an extended warranty.

 

11/14

IF YOU NEED SERVICE:

1.

  Before contacting us to arrange service, please determine whether your product requires repair.  

Some questions can be addressed without service. Please take a few minutes to review the  
Troubleshooting or Problem Solver section of the Use and Care Guide, scan the QR code on  
the right to access additional resources, or visit https://www.whirlpool.com/product_help.

2. 

 All warranty service is provided exclusively by our authorized Whirlpool Service Providers.  

In the U.S. and Canada, direct all requests for warranty service to:

 

Whirlpool Customer eXperience Center

 

In the U.S.A. call 1-800-253-1301. In Canada call 1-800-807-6777.

If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies.

https://www.whirlpool.com/product_help

ONE YEAR LIMITED WARRANTY

WHAT IS COVERED

WHAT IS NOT COVERED

1.

  Commercial, non-residential, multiple-family use, or use inconsistent with published user, 

operator, or installation instructions. 

2.

  In-home instruction on how to use your product.

3.

  Service to correct improper product maintenance or installation, installation not in 

accordance with electrical or plumbing codes, or correction of household electrical or 
plumbing (i.e. house wiring, fuses, or water inlet hoses).

4.

  Consumable parts (i.e. light bulbs, batteries, air or water filters, preservation solutions, 

etc.).

5.

  Defects or damage caused by the use of non-genuine Whirlpool parts or accessories.

6.

  Conversion of your product from natural gas or L.P. gas or reversal of appliance doors.

7.

  Damage from accident, misuse, abuse, fire, floods, acts of God, or use with products not 

approved by Whirlpool.

8.

  Repairs to parts or systems to correct product damage or defects caused by 

unauthorized service, alteration, or modification of the appliance.

9.

  Cosmetic damage including scratches, dents, chips, and other damage to appliance 

finishes unless such damage results from defects in materials and workmanship and is 
reported to Whirlpool within 30 days. 

10.

  Discoloration, rust, or oxidation of surfaces resulting from caustic or corrosive 

environments, including but not limited to, high salt concentrations, high moisture or 
humidity, or exposure to chemicals.

11.

  Pick-up or delivery. This product is intended for in-home repair.

12.

  Travel or transportation expenses for service in remote locations where an authorized 

Whirlpool servicer is not available.

13.

  Removal or reinstallation of inaccessible appliances or built-in fixtures (i.e. trim, 

decorative panels, flooring, cabinetry, islands, countertops, drywall, etc.) that interfere 
with servicing, removal, or replacement of the product.

14.

  Service or parts for appliances with original model/serial numbers removed, altered, or 

not easily determined.

The cost of repair or replacement under these excluded circumstances shall be 
borne by the customer.

For one year from the date of purchase, 

when this major appliance is installed, 
operated, and maintained according 
to instructions attached to or furnished 
with the product, Whirlpool Corporation 
or Whirlpool Canada LP (hereafter 
“Whirlpool”) will pay for Factory 
Specified Replacement Parts and repair 
labor to correct defects in materials or 
workmanship that existed when this major 
appliance was purchased, or at its sole 
discretion replace the product. In the event 
of product replacement, your appliance 
will be warranted by the remaining term of 
the original unit’s warranty period.

YOUR SOLE AND EXCLUSIVE REMEDY 

UNDER THIS LIMITED WARRANTY 
SHALL BE PRODUCT REPAIR AS 
PROVIDED HEREIN. Service must be 
provided by a Whirlpool designated 
service company. This limited warranty 
is valid only in the United States or 
Canada and applies only when the major 
appliance is used in the country in which 
it was purchased. This limited warranty 
is effective from the date of original 
consumer purchase. Proof of original 
purchase date is required to obtain service 
under this limited warranty.

Содержание WHD5090GW




































Отзывы: