11
10
Top hinge cover
1
Top hinge screw
2
Top hinge
3
Bottom Hinge Screws
6
Cabinet plugs
4
Leveling Legs
7
Uninstall the cover and replace the light with a screwing light (120V/10W).
Refer to the illustrations and instructions below:
1. Move the lamp cover 1.2~2 (3.05-5.08 cm) according to arrow point direction.
"
2. Take out the lamp cover.
3. Rotate and take out the bulb in counterclockwise direction.
4. Replace bulb and reinstall lamp cover.
1. Remove
top
hinge
cover
and
3
top
hinge
screws
which
are
below
it
.
Then
remove
top
hinge.
2. Remove
1
cabinet
plug.
3. Remove
the
door.
4. Remove
right
and
left
leveling
legs.
5. Remove
the
bottom
hinge
and
3
bottom
hinge
screws.
6. Install the
bottom hinge on the
other side of the leveling legs with 3 bottom
hinge
screws.
7. Install right
and
left
leveling
legs
.
There
are
two
holes
below
the
refrigerator
to
fit
the
two
leveling
legs.
8. Install the door.
9. Install the
top
hinge
on
the
other
side
with
3
top
hinge
screws.
10. Install top
cover above
the
top
hinge
and
install 1 cabinet plugs on
the other
11
.
Adjust
the
leveling
legs.
side.
6
7
5
4
1
2
3
Bottom Hinge
5
NOTE:
Do not tilt the appliance over 45 degree when reversing the door
as possible damage to the sealed system may occur.