Whirlpool WGD9500EW, Руководство по установке

Страница: 23 / 26

23
1. Using the screws you set aside, reinstall hinge B (removed
from the lower-left corner of the door) in the upper-right
corner. Tighten all screws.
2. Using the screws you set aside, reinstall hinge A (removed
from the upper-left corner of the door) in the lower-right
corner. Tighten all screws.
A
A
B
A
A
B
7. Using a #2 Phillips screwdriver, remove the screws from the
opposite side and set them aside. Then, using a plastic putty
knife, remove the door latch from the top of the door by
gently pushing in the metal tab and lifting. Repeat for
the top and remove the latch.
REINSTALL HINGES ON DOOR
After removing the door latch,
move it to the opposite side,
place it in the open slot and
press it until the metal tabs
click into place. Replace the
screws you removed.
Door Latch Detail
Metal Tab