Whirlpool WFW94HEXR, Инструкция по использованию и уходу

Страница: 7 / 48

7
Swimwear, items Rinse /Drain Warm* Extra High N/A Extra Rinse This cycle adds water, then uses
that need rinsing only & Spin Warm High FanFresh high-speed tumbling and an extra
Cold Medium Delay Start high-speed spin. For some fabrics,
Low you may wish to set the spin speed
No Spin to a lower setting.
Wet load of clothes Rinse/ Drain N/A Extra High N/A FanFresh Use Drain & Spin to remove excess
& Spin High water from the load by choosing
Medium Rinse/Drain & Spin and turning off
Low Extra Rinse. Spin speed can be set
to a lower setting.
Small loads of 3–4 Quick Wash Hot Extra High Heavy Extra Rinse For small loads (3–4 items) needed
lightly soiled garments
Warm
High Normal FanFresh quickly. This cycle combines
Cold Medium Light Delay Start high-speed tumbling, a shortened
Low wash time, and a high-speed spin
for reduced drying times.
Jeans and denims Jeans
Warm Medium
Heavy Extra Rinse Cycle combines low-speed
(on some models) Cold Low Normal Presoak tumbling and medium-speed spins
No Spin Light FanFresh to provide gentle care for jeans and
Delay Start denims.
No clothes in washer Clean Washer Use monthly with Affresh ® to clean
with Affresh
®
the interior of the washer. Make
sure no clothes are in washer. The
Clean Washer light will flash every
30 loads to remind you to run the
Clean Washer cycle.
CYCLE GUIDE — SPECIAL-PURPOSE CYCLES
Cycle: Wash
Temperature*:
Spin
Speed:
Soil
Level:
Available
Options:
Cycle Details:
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Small load:
Fill the washer drum with 3-4 items, not more than 1/4 full.
Medium load: Fill the washer drum up to about 1/2 full.
Large load:
Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.
For best results, avoid packing tightly.
* All temperature selections feature a Cold rinse, except Warm*, which features a warm wash and a warm rinse.
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the
load being washed.
Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
Items to wash
using default
cycle settings: