Whirlpool WFW8540FW1, Инструкция по использованию и уходу

Страница: 18 / 33

18
12.
Touch and hold Start button to begin
wash cycle
Touch and hold the Start button for 3 seconds to start the
wash cycle. To pause a cycle in progress, touch the Start
button once, then touch and hold again to continue the cycle.
To cancel a cycle, touch the Power button.
Once you touch and hold the Start button, you will hear the
door lock, unlock, and lock again. The washer door will remain
locked during the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2
missed garments, you may do so while the
“Add Garment” light is lit. The time allowed
to add a garment will vary based on cycle
selection and load size.
Touch the Start button once; the door will
unlock once the washer movement has
stopped. This may take several minutes.
Then close the door and touch and hold
the Start button again to restart the cycle.
Adding items after “Add Garment” light is off:
Cancel the current cycle. Water will drain and you will need
to reselect the cycle and restart.
For wash performance and optimal energy savings, add
garments only when the “Add Garment” light is on.
13.
Remove garments promptly
after cycle is finished
Promptly remove garments after cycle
has completed to avoid odor and rusting of
metal objects on garments. When unloading
garments, pull back the door seal and check
for small items between the tub and the washer drum.
If you will be unable to remove the load
promptly, use the FanFresh ® option. If the
FanFresh ® option is selected, the washer
will automatically activate the fan and tumble
the load periodically for up to 12 hours.
To turn off the FanFresh ® option, touch
the Power button. To set the washer so
that the FanFresh ® option does not come
on for future cycles, touch FANFRESH.
NOTES:
n
The door will remain locked while the FanFresh ® option is
active. To cancel the option and unlock the door, touch the
Power button.
n
A small amount of water may remain in the dispensers after
the wash cycle is complete. This is normal.
n
This washer has a tight seal to avoid water leaks. To avoid
odors, leave the door open to allow the washer to dry
between uses.