4
Strip Circuits
The following individual circuits are for use in diagnoses, and are shown in the ON position. Do not continue with the diagnosis of the appliance if a fuse
is blown, a circuit breaker is tripped, or if there is less than a 240 +10%/-15% volt power supply at the wall outlet.
Strip Circuit Table
L1
BK
Surface Burner Ignition Switch
BK
BK
R
R/BK
J1-9
BK
J1-10
DSI Board
Burner
Burner
Burner
Burner
GND
J1-4
W W
N
From
To Results
Notes
Door switch
Con 3-3
Con 3-4
Door open = open circuit
Door closed = closed circuit
Latch motor
Con 1-4
W (Neutral)
500 - 3000
Ω
Latch motor locks door at start
of clean cycle
Oven temperature
sensor
Con 3-9
Con 3-10
1000 - 1200
Ω
at room temperature
Disconnect connector Con 3 from control
before measuring oven temperature
sensor
Oven light
Con 1-5
W (Neutral)
0 - 40
Ω
nominal
Latch Switch
Con 3-1
Con 3-4
Door open = open circuit
Door closed = closed circuit
