background image

2

TABLE OF CONTENTS

DISHWASHER SAFETY............................................................................... 2

INSTALLATION REQUIREMENTS ............................................................. 3

Tools and Parts......................................................................................... 3
Location Requirements............................................................................. 4
Drain Requirements .................................................................................. 6
Water Supply Requirements..................................................................... 6
Electrical Requirements ............................................................................ 6

INSTALLATION INSTRUCTIONS ............................................................... 7

Prepare Cabinet Opening—Existing Utilities............................................ 7
Prepare Cabinet Opening—New Utilities ................................................. 7
Prepare and Route Water Line ................................................................. 8
Install Drain Hose ...................................................................................... 9
Prepare Dishwasher................................................................................ 11

Make Power Supply Cord Connection .................................................. 13
Determine Cabinet Opening................................................................... 14
Choose Attachment Option.................................................................... 15
Move Dishwasher Close to Cabinet Opening ........................................ 16
Connect to Water Supply ....................................................................... 18
Connect to Drain..................................................................................... 19
Make Direct Wire Electrical Connection................................................. 20
Secure Dishwasher in Cabinet Opening ................................................ 21
Complete Installation.............................................................................. 23
Check Operation..................................................................................... 24
If Dishwasher Does Not Operate............................................................ 24
Additional Tips ........................................................................................ 24

DISHWASHER SAFETY

  

You Need to:

Slowly open dishwasher door while someone grasps the rear 
of the dishwasher. Remove shipping materials, drain hose and 
lower rack. Close dishwasher door until latched.

NOTE: Each dishwasher is tested at the factory and may contain 
some residual water in the tub as a result of the test.

Observe all governing codes and ordinances.

Install this dishwasher as specified in these instructions.

Installation should be performed by a qualified service 
technician. The dishwasher must be installed to meet all 
electrical and plumbing national and local codes and 
ordinances.

Care shall be exercised when the appliance is installed or 
removed, to reduce the likelihood of damage to the power-supply 
cord.
WARNING: To reduce the risk of electric shock, fire, or injury to 
persons, the installer must ensure that the dishwasher is 
completely enclosed at the time of installation.

You can be killed or seriously injured if you don't immediately 
 

You

 

can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

WARNING

Tip Over Hazard

Do not use dishwasher until completely installed.

Do not push down on open door.

Doing so can result in serious injury or cuts.

Содержание WDF750SAYM


























Отзывы: