13
INSTALLATION INSTRUCTIONS – ELECTRIC DRYER
Power Supply Cord
1.
Disconnect power.
2.
Remove the hold-down screw and terminal block cover.
3.
Install strain relief.
B
D
C
A
A. Neutral ground wire
B. External ground conductor screw
C. Center terminal block screw
D. Terminal block cover and holddown screw
Electrical Connection Options
If your location has:
And you will be
Go to Section
connecting to:
4-wire receptacle
A UL listed, 120/240-
4-wire connection:
(NEMA Type 14-30R)
volt minimum,
Power supply cord
30-amp, dryer power
supply cord*
3-wire receptacle
A UL listed, 120/240-
3-wire connection:
(NEMA type 10-30R)
volt minimum,
Power supply cord
30-amp, dryer power
supply cord*
4-wire direct
A fused disconnect or
4-wire connection:
circuit breaker box*
Direct Wire
3-wire direct
A fused disconnect or
3-wire connection:
circuit breaker box*
Direct Wire
*If local codes do not permit the connection of a cabinet-ground conductor to the neutral wire, go to “Optional 3-wire connection”
section.
5"
(127 mm)
3
1
⁄
2
"
(89 mm)
